Features

· Besides suitable for solid drawn tube of puncher and main transmission of tube mill, it's also suitable for industry of mining , metallurgy, cement, energy, building materials, jack-up transport and so on.

· The gear unit features compact structure, light weight, small volume, high ability of load, low noise and vibration . Besides, the output shaft has high capacity of load.

· The gear unit can achieve test of temperature and vibration automatica- lly.

· The gear is manufactured by high-quality alloy steel with carburizing and quenching. The gear is modified with gear profile and lead. The accuracy of gear can reach grade 5-6 (GB10095-2001).

· The housing is adopting horizontal and split structure which is asily manufactured and maintained, good appearance as well. The housing is welded manufactured which is anņealed after welding. The case will be dealt with aging treatment in order to eliminate residual stress after rough machining. So, the case deforms hardly.

· The gear unit uses forced spray oil lubrication, the lubrication pipelines is distributed in or out of the gear unit, which can lubricate the gear and bearing sufficiently. The oil inlet and the oil discharge mouth are mounted on the gear unit. The pressure switch , the flux monitor and the cut-off valve are mounted near the oil inlet. The pressure switch and the flux monitor can monitor the oil supply and feed back the pressure and flux signal which is switch quantity or analog quantity to primary control syste.

Technical Parameters